01 · Enquiry
Send your drawings, quantities, finishes and delivery requirements.
Furniture manufacturing · Kosovo
Your specification.
Our production.
Kitchens, wardrobes, bathroom units and interior doors, made for your brand or project. One manufacturing partner for complete room packages across Europe.
Shopping for your home? Explore home kitchens →
2002Woodworking since
55 mContinuous finishing line
Any RALColour to specification
OEMYour brand, our production
01 What we are
How we work with distributors and contractors.
We sell our own product in Kosovo. Everywhere else, we work as a manufacturer for other people’s brands. That distinction is deliberate, and it is the basis on which every export programme we run is set up.
01
Own-brand / OEM
Our engineering and our standard construction, produced under your brand. The fastest route to a range, because the development work is already done.
02
Contract manufacture
Your drawings and your specification, built to them. We engineer for production and come back with what needs to change and what it will cost if it doesn’t.
03
Complete room packages
Kitchenette, wardrobe, vanity, desk, headboard panelling and the room door — one specification, one colour, one delivery, one supplier to chase.
We manufacture and we deliver. We do not design your projects, we do not specify on your behalf, and we do not install on site — those are your business and we are not set up to take them.
On an own-brand programme our name does not appear on the product, the packaging or the documentation that reaches your client. What we make on your programme is yours to sell as yours.
02 Products
Five categories. One construction standard.
The specification below is what we build as standard for project work. Every element of it is open to change on an own-brand or contract programme — a starting point, not a catalogue you have to buy from.
From the showroom
Photographed in our showroom at Preoc. Installed work, not visualisations.
Handleless fronts, island seating, tall oven housing
Matt handleless fronts with glazed wall cabinets
Framed lacquered fronts, wood-effect wall units
Matt handleless fronts, full-height tall units
Lacquered fronts, wood-effect wall units, tall housings
Kitchens & kitchenettes
Noir WalnutLacquered MDF fronts with compact laminate worktop
Soft UrbanLacquered MDF fronts with compact laminate worktop
PrestigeLacquered MDF and walnut veneer with compact laminate worktop
Lumière SandLacquered MDF and walnut veneer with compact laminate worktop
Royal BlueEngraved MDF fronts with compact laminate worktop
Classic IvoryEngraved MDF fronts with compact laminate worktop
The six programmes below are shown as visualisations. On an own-brand programme the fronts, colour, handle system and hardware are specified by you.
Standard construction
| Carcass | 18 mm board, PUR-edged all round |
|---|---|
| Back panel | 5 mm, rebated |
| Fronts | Lacquered MDF · engraved MDF · real wood veneer · CPL |
| Worktop | Compact laminate standard; alternatives to specification |
| Handles | Integrated gola profile, horizontal or vertical · handleless · conventional |
| Hardware | Blum Aventos lift systems, soft-close drawers and hinges; your nominated brand on an OEM programme |
| Lighting | Integrated LED under-cabinet and shelf lighting |
| Appliances | Fitted to your nominated brand and cut-outs, or supplied free of appliances |
Wardrobes, vanities and casegoods
Everything else in the room, built to the same standard as the kitchen units so that the whole package matches once it is installed.
| Construction | Same carcass and edging standard as kitchen units |
|---|---|
| Wardrobes | Hinged or sliding; fitted or freestanding; internal fit-out to specification |
| Vanities | Moisture-appropriate substrate and finish for bathroom use |
| Desks & shelving | Wall-fixed or freestanding, with cable management |
| Bed & storage | Frames, under-bed storage and headboard panelling |
| Common areas | Reception desks, laundry and mail runs, study carrels, lounge and back-of-house units |
Photography of installed wardrobes, vanities and casegoods is available on request.
Interior doors, complete
A door is not a leaf. It is a leaf, a frame, an architrave, a lock, hinges and a handle — and on a project of any size those six things routinely arrive from four suppliers, in two finishes, three weeks apart. We engineer and finish the whole assembly in-house, on the same line as the joinery, in the same colour.
Lacquered
Veneer
Plain faceLine · lacquered MDF · RAL 9016, 7016 and 6013 standard · any RAL to order
Glazed insertLine 01 · lacquered MDF with a vertical glazed insert · any RAL to order
Vertical groovesLine 02 · lacquered MDF, two vertical grooves · any RAL to order
Horizontal groovesLine 03 · lacquered MDF, horizontal grooves · any RAL to order
OakOak veneer, matched leaf and frame
WalnutWalnut veneer, matched leaf and frame
Dark oakDark oak veneer, matched leaf and frame
Walnut + RAL 9005Walnut veneer leaf with a contrasting RAL 9005 frame
Every design is supplied as a complete set — leaf, frame, architrave and ironmongery. CPL laminate is available on the same designs where maximum abrasion resistance is wanted.
Construction and ranges in full
| Leaf | Tubular core in a solid timber frame, faced both sides in 6 mm MDF |
|---|---|
| Frame | Flat, square-edged; 10×10×10 or 10×10×20 profile |
| Hinges | Concealed, adjustable on three axes, satin chrome |
| Lock | Key, cylinder or magnetic |
| Handles | Six options — satin chrome, polished chrome, polished black |
| Maximum sizes | 2,040 mm high · 930 mm wide · 230 mm wall |
| Lacquered | Four face designs — plain, glazed insert and two grooved. RAL 9016 and 7016 standard; any RAL to order |
|---|---|
| Veneer | Oak, walnut and dark oak; walnut leaf with contrasting RAL 9005 frame |
| Laminate | CPL where maximum abrasion resistance is wanted |
| Opening | Single or double leaf; in-wall pocket sliding; on-wall sliding |
| Supplied as | Complete door set — leaf, frame, architrave, ironmongery |
Send a drawing or a unit list and we will engineer it, price it ex-works and delivered, and state a lead time.
Request a quoteDesign visualisations of current programmes. Photography of installed work, and physical samples, available on request.
Door programmes supplied
Complete door sets — leaf, frame, architrave and ironmongery — supplied to residential and mixed-use developments in Kosovo.
Prishtina City Center
Marigona Hill
Marigona Hill
Lagja Simfonia
Developer visualisations.
Matched across every category
Because all five categories run through the same finishing line, the wardrobe front, the kitchenette door, the vanity and the room door can be specified in one colour and produced in one batch.
Sourced separately from separate suppliers they almost never match — not badly, but visibly, once they are installed a metre apart in the same room. It is one of the most common snags on a fit-out handover list, and it is a sourcing decision rather than a workmanship problem.
Surfaces
- Lacquered, water-based, any RAL, to 95% gloss
- Real wood veneer — oak, walnut, dark oak
- CPL laminate where abrasion resistance matters more than a lacquered look
- Melamine on the same carcass programmes
- Colour matched to a supplied sample on request, with a reference panel retained
03 The plant · Preoc, Kosovo
Plant and equipment.
Any supplier can describe a process. This is the equipment it runs on, named, so you can judge for yourself what it is capable of holding.
Holz-Her Tectra 6120 — beam saw
Holz-Her Pro-Master — CNC machining centre
Holz-Her Sprint 1327 — edgebander, PUR
Holz-Her Evolution 7405 — vertical CNC
Heesemann MFA Impression — wide-belt sanding
A second production site
Additional panel processing, CNC machining and assembly capacity, available to the same programmes.
Panel processing and assembly hall
Holz-Her Evolution — vertical CNC
Assembly and packing
Take a closer look at production.
A look inside CANDEO kitchen production.
Press play to watch with sound. 1 min 19 sec.
morbidelli cx100 — drilling a panel
— Boring & routing
Every hole, in one pass.
A room package is thousands of holes — hinge cups, shelf pins, dowels, cable ports, grooves for the backs. Whether a unit assembles cleanly on site is decided here, not at the bench.
The SCM morbidelli cx100 bores all five faces, grooves and routes without the part moving to another machine. SCM build it for batch-size-one work: each panel can differ from the last with no set-up penalty. That is what makes a non-standard width ordinary rather than a special.
| Panel range | 200–3,050 mm long · 70–900 wide · 10–60 thick |
|---|---|
| Boring | 12 vertical spindles, 4 on X, 2 on Y — five faces, one pass |
| Also cuts | Grooves, vertical routing, edge rounding, toe-kick |
| Output | Up to 400 pieces per shift |
Manufacturer’s published figures.
55 metres, fifteen stations, one pass
The surface process is a single continuous line rather than a series of separate operations with a wait between each: belt transport, sanding, dedusting, spray machine, laminar stack oven, turbulent drying, IR curing, UV 3D dryer, cooling tunnel and roller conveyor, under one line control.
A panel enters raw and leaves dry in roughly nine minutes. Coatings are Hesse Lignal, water-based throughout — low emission, and a system European specifiers already recognise.
| Line length | 54,840 mm overall, fifteen stations |
|---|---|
| Sanding to dry | Approximately nine minutes |
| Gloss | To 95% |
| Colour | Full RAL range as standard; matching to a supplied sample on request |
| Coatings | Hesse Lignal, water-based |
| Reference panels | Retained per programme for repeat and replacement orders |
Venjakob VEN Spray Perfect
Layout — 54,840 mm overall
Capacity, current lead times and a plant visit are confirmed on request — we would rather give you a number that is true this month than publish one that ages.
Arrange a plant visit04 Quality & compliance
How consistency is held across a programme.
Anyone can build one good unit. The question a buyer is actually asking is whether unit four hundred is the same as unit one, and whether the replacement ordered in year three still matches. Everything below exists to answer that.
One construction standard
Every category is built on the same carcass and edging standard, so quality does not vary by product line or by which team happened to build it.
PUR edging throughout
Polyurethane adhesive cross-links as it cures, so the glue line stops being water-soluble. It matters most where a joinery failure normally starts — bathrooms and kitchens.
Water-based coatings
Hesse Lignal systems throughout. Low emission, and a coating house European specifiers and their clients already know.
Colour, held on record
A reference panel is retained for every programme. Repeat and replacement orders are matched to the panel, not to a colour code and a memory.
Inspection at source
Defects found at assembly cost ten times what they cost at the machine that made them. Parts are checked where they are produced, before they carry any further value.
Piece-level traceability
Every part carries a barcode tying it to a project, a module and a position, from the machine that cut it through to the pallet it ships on.
Every piece is labelled at the machine that made it.
Each part carries a barcode encoding its project, its module, the piece number and how many pieces complete that module. Parts are scanned as they move and sorted into a numbered bin per module, so a module is only released for assembly when it is genuinely complete.
Certification, answered straight
We would rather answer this precisely than print a row of logos. At first enquiry we state in writing exactly which certifications and test reports we hold, which are in progress, and which we do not have — with the material declarations, formaldehyde class and coating data sheets for what we would supply you.
If your client requires something we do not currently hold, tell us early. Some of it is achievable inside a programme timeline and some is not, and you should have that answer before you commit to us rather than after.
Documentation we can supply
- Material and board declarations for the substrate supplied
- Coating system data sheets and safety data sheets
- Hardware specification and manufacturer documentation
- Packing lists by project, room and module
- Colour reference panel retained per programme
- Test reports and certificates as held — stated honestly at enquiry
Tell us what your client requires and we will state in writing what we hold, what is in progress and what we do not.
Request our documentation05 Delivery
Delivery on established road corridors.
Deliveries run with 3P, a logistics operator running established road corridors from Kosovo to Ljubljana and from Kosovo to Greece. The delivery leg is not handed to whichever haulier is cheapest that week.
Scheduled to your programme
Loads are planned against your installation dates. A package that arrives three weeks early is storage you pay for; one that arrives late stops a floor.
Consolidated
Every category for a project travels together rather than as separate consignments from separate suppliers on separate days.
Labelled to the room
Pallets and packages are labelled by project, room and module, so material is distributed on site instead of being opened and sorted first.
Wrapped and loaded inside the plant. Samples, first articles and replacement parts leave on the DHL Express network; full loads travel 3P’s road corridors.
| Corridors | Kosovo – Ljubljana · Kosovo – Greece, operated by 3P |
|---|---|
| Wider Europe | Quoted per programme |
| Transit times | Confirmed at quotation for your destination |
| Incoterms | Ex-works or delivered; agreed per programme |
| Packaging | To specification — protected for transport and for site handling |
| Replacement parts | Identified from the production record and re-made to the retained reference panel |
Give us a delivery address and a required date, and we will quote the freight and the transit time with the goods.
Ask for a delivered price06 Why an external plant
Why buyers place volume with an external plant.
Capacity
Take a larger project than your own workshop can carry, without buying machinery for a peak you may not see again.
Landed cost
European production, European material standards, and a cost base that is not western European — on a road corridor we already run.
Consolidation
One supplier for every category in the room instead of four, which removes the mismatch that comes free with split sourcing.
Independence
A credible second source. Most procurement problems are single-supplier problems nobody solved before they became urgent.
Working together
From your brief to delivery.
02 · Quotation
Review the specification, price and proposed lead time.
03 · Approval
Agree the specification and any samples required before production.
04 · Production
Your agreed programme moves through manufacturing and inspection.
05 · Delivery
Receive the labelled room packages at the agreed destination.
Minimum quantities, sample requirements and current lead times are confirmed with your quotation.
Discuss your programme— Trade & export enquiries
Request a quotation.
Send a drawing, a room specification, or the details of a package you have purchased elsewhere. We will engineer it, quote it ex-works and delivered, and state the lead time.
Direct
- info@candeohome.com
- +383 48 100 494
- Plant: Preoc, Kosovo
- Plant visits welcome, by arrangement
Useful to include
- Drawings or a specification at whatever stage they exist
- Quantities, and whether they repeat
- Finish and colour, or a sample to match
- Delivery address and required date
- Any certification your client requires
We do not publish prices. Every programme is quoted to its specification and volume.